Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

This is a guide to the initial setup for your Hibob integration. This can only be done by the Hibob Admin.

Creating a Service User

Once you have logged in to your Hibob account here. You will be met with your home page. Navigate to the settings at the bottom left-hand corner.

Screenshot 2024-03-11 at 17.06.14.png

You will be directed to your Hibob settings - at the lower left-hand menu, there is an integrations field select this.

Screenshot 2024-03-11 at 17.12.10.png

This is where we will establish Learn Amp as a Service User. To create a service user select ‘manage' under the service user tile and select ‘create new service user’

Screenshot 2024-03-11 at 17.15.13.pngScreenshot 2024-03-11 at 17.17.13.png

When creating a new service user you will have to give them a name, we recommend 'Learn Amp' so it is recognisable. Once this has been done successfully you will be a Service ID and a Service Token. (This will need to be added to your Learn Amp Account later)

 

Screenshot 2024-03-11 at 17.20.15.png

 

 

You can now select ‘done’ and navigate back to the settings page.

Setting Permissions

You should now go to the account tab and select permission groups.

 

Screenshot 2024-03-11 at 17.34.11.png

You will then see all your current permission groups - you can add a service user (Learn Amp) to an existing permission group, however, we recommend that you create a new permission group exclusive to Learn Amp.

1. Creating a group

Have you already created the Service User group before?

If you have created your group, you should jump to step 2 and edit the existing group to make sure that it captures all the correct permissions.

You should be prompted to create a group - group name and description are mandatory.

Under the Group members tab toggle ‘Select people by condition’ and click ‘Select People’

 

Screenshot 2024-03-11 at 17.40.54.png

Here is where we add Learn Amp as a Service User, under service users toggle on the recently created service user (Learn Amp) and hit ‘Apply’.

 

Screenshot 2024-03-11 at 17.54.54-20240311-175500.png

2. Setting or updating Access rights

You should now have been taken to the “People’s data” tab and the “Access rights” section.
If you’re not redirected automatically, or need to edit the group, go to System setting → Account → Permission Groups → Click on the group → People’s data).

Follow the below steps to set the correct permissions:

  1. Choose ‘Select people by condition’ (as per below image)

Screenshot 2024-03-11 at 17.43.26.png
  1. Click ‘Edit’

  2. A pop-up window will appear, prompting you to select conditions.

  3. Ensure to add the condition: “Lifecycle status” → “Equals” → Check all the available options and click “Apply”.

When selecting ‘Everyone’ we have detected that in certain circumstances Hibob will filter out some users depending on their condition.

But ultimately, if you really don’t want users with a certain condition/status to have any access, like terminated users, then remove the option from the Lifecycle status.

Why do we need to select all available options?
This is going to be necessary to ensure all the user data additions and updates are correctly passed into Learn Amp, so that nothing is left out of sync when changes are made on the HiBob side.
On the Learn Amp side, we will handle the logic of syncing all the relevant users.

Screenshot 2024-03-11 at 17.48.22.png

This is what the page should look like. Click “Apply” to save the changes.

image-20240626-135026.png

3. Update “Lifecycle” section

  1. Go to the group tab

  2. On the "Search Permission" input, type "View selected employees' Lifecycle sections"

  3. Click it, and you will be taken to the checkbox, and the checkbox will be highlighted

  4. Check the option: "View selected employees' Lifecycle sections"

  5. Click "Save"

image-20240325-110502.png

Once these properties have been set you can hit ‘Apply’ and then ‘Save’ on the permission group settings.


Refreshing the Token

Navigate back to the ‘Service Users’ tab under integrations in settings and select ‘refresh tokens’.

 

Screenshot 2024-03-11 at 18.03.35.png

Now you have received the new token info.

Screenshot 2024-03-11 at 18.04.15.png

Once you have copied the Service User ID and Token you need to paste this into your Learn Amp integration on the integration page

 

Screenshot 2024-03-11 at 18.06.01.png

Your Hibob Integration will now be set up 🎉

  • No labels